ClearroomDownload

Signature Profiles

Hear it the way they hear it.

A Signature Profile is a target curve cut with an engineer and signed. Import it into Clearroom and it becomes your target — the ★ and the name stay attached to the file.

Sanjeevi Easwar at his console, monitors on the wall behind him.

★ Signature Profile · Room

Sanjeevi Easwar

Los Angeles, USA · Grammy-nominated mixing engineer · Ledisi, “The Crown” & “Love You Too” · 68th Grammy Awards

mixing

“The best sessions are the ones where you forget the room’s even there. I’ve had a lot more of those since.”

  • Sub −1.2 dB · below 60 Hz
  • Bass Punch −1.6 dB · at 67 Hz
  • Body +0.4 dB · at 300 Hz
  • Sheen +0.7 dB · above 10 kHz
  • on Harman
Open profile →Download sanjeevi.clearroom-target
Akash Shravan at a studio desk, monitor speakers behind him.

★ Signature Profile · Headphone

Akash Shravan

Chennai, India · Mixing and mastering engineer · 6× Platinum, 350+ credits

mixingmastering

“My low-end calls translate now. And it doesn't sound corrected. It just sounds natural.”

  • Sub −0.8 dB · below 60 Hz
  • Bass Punch +2.5 dB · at 60 Hz
  • Warmth +3.9 dB · at 167 Hz
  • Body +2.1 dB · at 500 Hz
  • Vocals −2.2 dB · at 1.26 kHz
  • Presence +4.0 dB · at 3.72 kHz
  • Air −3.6 dB · at 7.9 kHz
  • Sheen +2.2 dB · above 10 kHz
  • on Harman
Open profile →Download akash-shravan.clearroom-target

How to use a Signature Profile

1

Download the signed file

Click Download to save the .clearroom-target file to your Mac. It carries the artist’s signature, so Clearroom shows the ★ and their name once it is imported. Keep it anywhere you like.

2

Choose Custom as your target

In Clearroom, measure your room or pick your headphones as usual. To use a room you have already measured, click the target chip with the ✎ on the main screen. When the Generate screen asks for a target, select Custom. The Target Editor opens.

3

Import it and create your correction

In the Target Editor, click Import, select the file you downloaded, then click Use ▶. The Custom card on the Generate screen now carries the artist’s profile, with the ★ and their name attached. Click Create Correction to build your correction towards their curve. The signed file is never overwritten: any change you make is saved as your own copy.

More profiles are cut with each artist and verified against their room before they ship.